Polycom avaya 500d Manual De Usuario

 Installation Instructions and User's Guide

4

 Installation Instructions and User's Guide

5

8.  Press 

 to hear a dial tone.

  The microphone status LEDs on the 

top of the console will show a steady 

green when the system is on. 

Press 

 to terminate any 

conference call. 

6.  Plug the Power Adapter Cable into 

the 500D/550D Interface Module jack 

marked 

 then plug the Power 

Adapter into the electrical outlet.

  The first time the SoundStation Premier 

500D/550D is powered up and 

connected to the network through the 

500D/550D Interface Module, it will 

run a brief self-test and synchronize 

itself with your telephone network. 

During this time the LEDs will blink. 

When the process is complete you 

will hear a “bong” tone and the 

LEDs will switch off. (This process 

can take 20 seconds.)

7.  Place the SoundStation Premier 

500D/550D on a flat, stable surface 

in the center of the room. 

  If using the extended hypercardiod 

microphones with the 550D, for the 

best coverage, position as shown in 

the examples to the right. 

Extended 

Microphone

SoundStation Premier 

550D Console

ON/OFF

VOL

L09/Volumn button

RINGER VOL

3.  Plug the long SoundStation Premier 

cable into the jack on the 500D/550D 

Interface Module labeled with the 

SoundStation Premier (

)icon as 

shown.

4.  Plug the other end into the slot under 

the SoundStation Premier 500D/550D 

Console as illustrated.

  Then thread the cable through the 

channels on the underside of the 

console as shown at right.

5.  The SoundStation Premier 550D 

is designed for greater room 

coverage with extended microphones.

  If using the optional extended 

microphones, connect to SoundStation 

Premier 550D as shown at right.

  (If the connector does not fit you will 

need one of the optional cables as 

a replacement for your phone cable. 

This cable has a smaller connector 

on one end, so try it both ways.)

  Any digital phone supported by your 

telephone network can be connected 

to the phone jack on the 500D/550D 

Interface Module.

9.  Press

 again and while 

the phone is off adjust the ringer 

volume on the SoundStation Premier 

500D/550D by pressing SHIFT 

then   

 or 

  .

  There are four settings: OFF, LOW, 

MID, and HIGH. The levels will be 

heard after each key press and shown 

on the display. After 5 seconds the 

display will return to its previous mode.

10

. To program your phone number, press 

 then press the 

 key. 

Enter the phone number with area code, 

using the 

*

 key to enter a space. 

When finished, press 

 again.

  To retrieve the phone number at any 

time during a phone call, press 

 

then press the 

 key. The phone 

number will be displayed for 10 

seconds, after which the display will 

return to its previous mode. This display 

will default to this number while the 

conference phone is inactive.

  You are now ready to use your 

SoundStation Premier 500D/550D.

CONF

THIS PHONE #

SoundStation Premier 

500D/550D Console

500D/550D 

Interface Module

500D/550D 

Interface Module

Power

Adapter

Electrical

Outlet