OKI LP440 Manual De Usuario

49

You can choose to dispense labels in Continuous Mode and 

Dispense Mode. In either mode, test printing and online 

printing are available.
Configuring Dispense mode 
Dispense Mode can be set to Auto Print or Manual Print, as 
described below.

To switch between Auto or Manual Print for the Dispense 

Mode, set the DIP switches and then hold down the PRINT or 

FEED button when turning the printer ON. The new settings 

take effect when the printer is next turned ON.

Switching from Manual to Auto Print 
1. Turn the printer off.
2. Make sure DIP switches 1-2-3-4 are set to 

OFF-OFF-OFF-ON.

3. Open the cover.
4. Press and hold the PRINT button while turning the printer 

on.

5. Close the cover.
Switching from Auto to Manual Print
1. Turn the printer off.
2. Make sure DIP switches 1-2-3-4 are set to 

OFF-OFF-OFF-ON.

3. Open the cover.

Auto Print

Prints one label after receiving data and waits for 
peeling. After the label is peeled off, the printer 
automatically prints the next label.

Manual 
Print

Prints one label after receiving data and goes off-line. 
Press the PRINT key to print the next label. After the 
specified number of labels are printed, printing 
terminates. No printing occurs even when the PRINT 
key is pressed.