OKI LP440 Manual De Usuario
50
4. Press and hold the FEED button while turning the printer
on.
5. Close the cover.
When setting the dispense mode, the STATUS LED blinks
When setting the dispense mode, the STATUS LED blinks
green, and turns into a steady green signal upon completion
of setting. Turn off the printer ONLY when the STATUS LED is
a steady green light.
Status LEDs for Printing Modes
Available modes include Normal, Test Print, Head Check
Setting and Online Command Setting mode.
Status LEDs for Normal Mode
Note: The Battery indicator (only available on the Bluetooth/
WLAN model) remains lit even when the printer is
OFFLINE. During the Standby state, the printer
resumes normal operational status upon sensing any
incoming data or pressing of the buttons.
Status LEDs for the Test Print Mode
Enter Test Print mode by using the FEED and POWER buttons.
Operational State
STATUS LED LED Action
START OF PRINTING
Orange
Steady
ONLINE
Green
Steady
OFFLINE
OFF
NA
STANDBY (after 5
seconds of inactivity)
seconds of inactivity)
Green
Blinks every 4
seconds
seconds
Operational State
STATUS LED
LED Action
ENTERING TEST
PRINT MODE
PRINT MODE
Orange
Steady
START OF TEST
PRINT
Green
Blinks
DURING TEST PRINT
Green
Steady
END OF TEST PRINT
OFF
NA