Konica Minolta kn-304 Manual De Usuario
2-6 KN-304 Network Board
Chapter 2 Setting up from the LCD Panel
1. IP Address
Designate the IP address assigned to the KN-304 Network Board. The IP address is a set of
four numbers (0-255 each) delimited with a dot (.), like “192.168.0.10”. The mark “+” indicates
a digit which can be entered or changed. If a value you have entered is out of range, a
message will say “Illegal input, try this part again!” The default is “0.0.0.0”. Press [Previous] to
go back to the previous menu.
2. Subnet Mask
Designate the subnet mask. The subnet mask is a set of four numbers (0-255 each) delimited
with a dot (.), like “255.255.255.0”. The mark “+” indicates a digit which can be entered or
changed. If a value you have entered is out of range, a message will say “Illegal input, try this
part again!” The default is “0.0.0.0”. Press [Previous] to go back to the previous menu.
3. Gateway
Designate the IP address of the gateway; a set of four numbers (0-255 each) delimited with a
dot (.), like “192.168.0.1”. The mark “+” indicates a digit which can be entered or changed. If
a value you have entered is out of range, a message will say “Illegal input, try this part again!”
The default is “0.0.0.0”.
4. Persistent IP Address
Select [1. Yes] to enable the IP address defined and [2. No] to disable. Press [Previous] to go
back to the previous menu. The default choice is [1. Yes].
●
LPD Banner Enable
Select “3. LPD Banner Enable” from the TCP/IP Setup menu, and the following window appears.
Select [1. Yes] to print LPD banner and [2. No] otherwise. Press [Previous] to go back to the previous menu.
The default choice is [2. No].