Konica Minolta kn-304 用户手册

2-6  KN-304  Network Board

Chapter 2  Setting up from the LCD Panel

1. IP Address

Designate the IP address assigned to the KN-304 Network Board.  The IP address is a set of

four numbers (0-255 each) delimited with a dot (.), like “192.168.0.10”.  The mark “+” indicates

a digit which can be entered or changed.  If a value you have entered is out of range, a

message will say “Illegal input, try this part again!”  The default is “0.0.0.0”.  Press [Previous] to

go back to the previous menu.

2. Subnet Mask

Designate the subnet mask.  The subnet mask is a set of four numbers (0-255 each) delimited

with a dot (.), like “255.255.255.0”.  The mark “+” indicates a digit which can be entered or

changed.  If a value you have entered is out of range, a message will say “Illegal input, try this

part again!”  The default is “0.0.0.0”.  Press [Previous] to go back to the previous menu.

3. Gateway

Designate the IP address of the gateway; a set of four numbers (0-255 each) delimited with a

dot (.), like “192.168.0.1”.  The mark “+” indicates a digit which can be entered or changed.  If

a value you have entered is out of range, a message will say “Illegal input, try this part again!”

The default is “0.0.0.0”.

4. Persistent IP Address

Select [1. Yes] to enable the IP address defined and [2. No] to disable.  Press [Previous] to go

back to the previous menu.  The default choice is [1. Yes].

●

 LPD Banner Enable

Select “3. LPD Banner Enable” from the TCP/IP Setup menu, and the following window appears.

Select [1. Yes] to print LPD banner and [2. No] otherwise.  Press [Previous] to go back to the previous menu.

The default choice is [2. No].