bobcat t190 Manual De Usuario
T190 Compact Track Loader
29
Operation & Maintenance Manual
STARTING THE ENGINE
Key Switch
WARNING
AVOID INJURY OR DEATH
•
Engines can have hot parts and hot exhaust gas.
Keep flammable material away.
Keep flammable material away.
•
Do not use machines in atmosphere containing
explosive gas.
explosive gas.
W-2051-1086
Perform the PRE-STARTING PROCEDURE. (See PRE-
STARTING PROCEDURE on Page 27.)
STARTING PROCEDURE on Page 27.)
Figure 58
Set the engine speed control to the 1/2 speed position
[Figure 58].
[Figure 58].
Figure 59
Turn the key switch to RUN [Figure 59]. The indicator
lights on the right instrument panel [Figure 59] will come
ON briefly and the Instrument Panel / monitoring system
will do a self test.
lights on the right instrument panel [Figure 59] will come
ON briefly and the Instrument Panel / monitoring system
will do a self test.
If the temperature is cold, the intake air heater will
automatically cycle. The Icon light (1) [Figure 59] will be
ON and the cycle time remaining will show in the hour
meter.
automatically cycle. The Icon light (1) [Figure 59] will be
ON and the cycle time remaining will show in the hour
meter.
When the Icon light goes OFF, turn the key switch to
START [Figure 59].
START [Figure 59].
Advanced Control System (ACS): Make sure both
hand controls are in the neutral position before
starting the engine. Do not move the Hand Control
levers from the neutral position when turning the key
to RUN or START [Figure 59].
hand controls are in the neutral position before
starting the engine. Do not move the Hand Control
levers from the neutral position when turning the key
to RUN or START [Figure 59].
NOTE: Make sure both hand controls (ACS) or
Joysticks (SJC) are in the neutral position
before starting the engine. Do not move the
levers or joysticks from the neutral position
when turning the key to RUN or START
[Figure 59].
before starting the engine. Do not move the
levers or joysticks from the neutral position
when turning the key to RUN or START
[Figure 59].
If either hand control is moved:
a. The neutral position for the hydraulic valve spool
and hand control may not be correctly calibrated.
This can result in movement of the lift or tilt hydraulic
cylinders when the hand control lever is returned to
the neutral position after start-up.
and hand control may not be correctly calibrated.
This can result in movement of the lift or tilt hydraulic
cylinders when the hand control lever is returned to
the neutral position after start-up.
OR
b. ACS (2) [Figure 59] indicator light on right
instrument panel will be ON.
instrument panel will be ON.
If either condition occurs, return key to STOP (3)
[Figure 59]. Put the controls in neutral position and
re-start the engine.
[Figure 59]. Put the controls in neutral position and
re-start the engine.
Release the key when the engine starts. It will return to
the RUN position.
the RUN position.
WARNING
AVOID INJURY OR DEATH
•
Fasten seat belt, start and operate only from the
operator seat.
operator seat.
•
Never wear loose clothing when working near
machine.
machine.
W-2135-1188
P-68134
B-15552B
1
2