bobcat t190 Manual De Usuario

Descargar
Página de 147
T190 Compact Track Loader
Operation & Maintenance Manual
30
Figure 60
(ACS)  Select hand control or foot pedal operation (1)
[Figure 60].
OR
(SJC) Select ‘ISO’ or ‘H’ Control Pattern (2) [Figure 60].
Figure 61
Press the PRESS TO OPERATE LOADER Button (1)
[Figure 61] to activate the BICS system and to perform
hydraulic and loader functions. (See Cold Temperature
Starting on Page 33.
)
NOTE: (SJC) The pending mode will flash which will
indicate PRESS TO OPERATE LOADER is
required. The light will flash when key is ON
and continue to flash until the PRESS TO
OPERATE LOADER button is pressed and
thereafter it will light solid. If the mode
(ISO / H) is changed while driving, the active
mode will be solid and the pending mode will
flash. When operation of the machine is
returned to neutral, the active mode will then
turn off and the pending mode will continue to
flash until the PRESS TO OPERATE LOADER
button is pressed.
WARNING
When an engine is running in an enclosed area, fresh
air must be added to avoid concentration of exhaust
fumes. If the engine is stationary, vent the exhaust
outside. Exhaust fumes contain odorless, invisible
gases which can kill without warning.
W-2050-1285
B-15993C
SJC
2
B-15993B
FRONT ACCESSORY PANEL
ACS
1
B-15551
1