Panasonic ICX Manual

Built-In ACD Supervisor Guide

Section 521

ICX-5.0-521 (ACD 4.0)

ICX (International) issued October 2000

DELETE (FF3)

This command deletes the current setting of displayed program lines.
Deletion can be repeated up to 19 lines.

The following screen display shows an example of deletion of line 01.

1. Confirm the specified line to be deleted, and press the HOLD

key.
Example: Line 01 is deleted.

2. The program line that was displayed is deleted, and the List Mode

screen is redisplayed.
When the specified line is deleted, each subsequent program line
is shifted up.

Note:

Note: If you press soft key 10 and select List at any of the above steps, the
List Mode screen is redisplayed.

ALL DELETE (FF6)

This command deletes all settings currently set to all lines in the currently
displayed program.

1. Press

key

0, and the HOLD key.

2. All of the program that was displayed is deleted, and only the

default END/DISC line is displayed.

SEARCH 1,015,010

01:DELETE(LINE)

To Delete Program

Line Data, Press

HOLD Key.

List

PLAY 7,1

01:Select FFKey

SEARCH 1,020,010

RET 02,010

PLAY 9,0

END/DISC

Program Delete:

DELETE(Program)

To Delete Program

Data, Press 0 and

HOLD Key

List

END/DISK

01:Select FFKey