CXtec NEW COMPATIBLE GIG SX MMF MINI GBIC WITH LC CONNECTORS AND LIFETIME WARRANTY Guia De Especificaciones
Chapter 3 Installing XFPs 47
Installing SFP and XFP Transceivers and GBICs
XFP models
XFPs are hot-swappable input/output enhancement components designed for use
with Nortel products to allow 10 Gigabit Ethernet ports to link with other 10
Gigabit Ethernet ports over various media types.
with Nortel products to allow 10 Gigabit Ethernet ports to link with other 10
Gigabit Ethernet ports over various media types.
lists and describes the Nortel XFP models.
Table 22 10GBASE-SR, 10GBASE-LR/LW, 10GBASE-ER/EW, 10GBASE-ZR/
ZW XFP models
ZW XFP models
Model number
Product number
Description
10GBASE-SR
AA1403005
Small Form Factor Pluggable XFP transceiver.
The range is 300 m with MMF.
The range is 300 m with MMF.
10GBASE-LR/LW
AA1403001
Small Form Factor Pluggable XFP transceiver.
The range is 10 km with SMF.
The range is 10 km with SMF.
10GBASE-ER/EW
AA1403003
Small Form Factor Pluggable XFP transceiver.
The range is 40 km with SMF.
The range is 40 km with SMF.
10GBASE-ZR/ZW
AA1403006
Small Form Factor Pluggable XFP
transceiver.The range is 80 km.
transceiver.The range is 80 km.
Note: The user can configure either LAN or WAN mode depending on
the line card (8683XLR is a LAN-only module. 8683XZR is a LAN/
WAN module). Model numbers ending in R denote a LAN interface;
model numbers ending in W denote a WAN interface.
the line card (8683XLR is a LAN-only module. 8683XZR is a LAN/
WAN module). Model numbers ending in R denote a LAN interface;
model numbers ending in W denote a WAN interface.
Note: For Release 4.1, Nortel recommends installing only one
10GBase-ZR/ZW due to cooling limitations on the 8683XLR and XZR.
Nortel further recommends the installation of the XFP only in Port 1. A
10GBase-SR, -LR/LW, or ER/EW can be installed in one or both of the
remaining ports.
10GBase-ZR/ZW due to cooling limitations on the 8683XLR and XZR.
Nortel further recommends the installation of the XFP only in Port 1. A
10GBase-SR, -LR/LW, or ER/EW can be installed in one or both of the
remaining ports.