Garmin VIRB 360 Manual De Propietario

The VIRB Remote accessory is a portable, mountable remote 

that can control your VIRB camera using ANT+ wireless 

technology. It has tactile buttons that allow you to start 

recording, stop recording, or take a photo without looking at the 

 to purchase a VIRB Remote 

accessory.

These instructions allow you to enable the remote control 

feature for one camera or for your main camera. If you have 

multiple cameras, you should follow the instructions for 

controlling multiple cameras remotely (

).

On your camera, from the main menu, select Wireless > 

Remote, and select the toggle switch to turn on the remote 

control feature.
The camera searches for a nearby main VIRB camera.

After the search times out, select  .
The remote control settings appear, with this camera set as 

the main VIRB camera.

Select an option:
• On your compatible Garmin device, launch the VIRB app 

or feature. See the owner's manual for the device for more 

information.

• On the VIRB remote, follow the pairing instructions in the 

accessory manual.

You can use one VIRB camera to control one or more other 

VIRB cameras. This allows you to perform the same action 

using multiple cameras at the same time.
To control multiple cameras, you must choose a main camera. 

This camera controls the other cameras, which are called 

extended cameras. When you start recording or take a photo on 

the main camera, the extended cameras start recording or take 

a photo at the same time. When you send a remote command 

using a VIRB remote or a compatible Garmin device, the main 

camera receives the remote command and sends it to the 

extended cameras.

Bring all of your VIRB cameras within 3 m (10 ft.) of each 

other.

On your main VIRB camera, from the main menu, select 

Wireless > Remote, and select the toggle switch to turn on 

the remote control feature.
The camera searches for a nearby main VIRB camera.

After the search times out, select  .
The remote control settings appear, with this camera set as 

the main VIRB camera.

Exit the menu and return to the home screen.

On your extended VIRB camera, select Wireless > Remote, 

and select the toggle switch to turn on the remote control 

feature.
The camera searches for your main VIRB camera and 

connects to it automatically as an extended camera.
TIP: If your camera is set to the incorrect mode, you can 

select VIRB Type to switch between the Main VIRB and 

Extended VIRB modes.

Repeat step 5 for each extended camera.

After all of the cameras are connected, select an option:
• To start and stop recording on all of your cameras, use the 

recording switch on your main camera.

• To take a photo from all of your cameras, select the photo 

key on your main camera.

• To control all of your cameras remotely, pair a VIRB 

remote or compatible Garmin device with your main 

camera (

).

The Wake On feature enables your camera to remain in a low-

power state instead of turning off. This allows your remote 

control device to wake the camera to start recording or take a 

photo.
NOTE: This feature consumes some battery power when the 

camera is off. To avoid draining the battery, you should disable 

this feature when you are not using the camera, or when you 

store the camera overnight or for a longer time period.

Select Wireless > Remote > Wake On.
When you turn off the camera, it enters remote wake-up 

mode.

Your device can be used with wireless ANT+ sensors. For more 

information about compatibility and purchasing optional sensors, 

go to 

When you pair a compatible ANT+ sensor with your device, the 

sensor data is recorded as G-Metrix data.

Put on the heart rate monitor, and install and activate the 

sensor.

Bring the camera within 3 m (10 ft.) of the sensor.

From the main menu, select Wireless > Sensors > Add 

New.
The camera detects your sensor, and the sensor name 

appears on the screen.

Select the sensor name, and select  .
After the sensor is paired with your device, the sensor status 

changes to Connected.

After you pair the first time, your camera automatically 

recognizes and connects to the ANT+ accessory each time it is 

activated and within range.

From the main menu, select Wireless > Sensors.

Select a sensor.

Select Forget Device >  .

You can connect a Bluetooth hands-free device with your VIRB 

camera.

From the main menu, select Wireless > Bluetooth > Status 

to turn on Bluetooth wireless technology.

Select Add New.

Select the wireless device to pair.
After the wireless device is paired, the device status changes 

to Connected.

Your VIRB camera can pair with a compatible Bluetooth 

ELM327 on-board diagnostics (ODB-II) device to record 

automotive data from your OBD-II compliant vehicle.
NOTE: Different vehicles provide different data. Not all vehicles 

and OBD-II devices are compatible with the camera.

12

ANT+ Sensors