Garmin VIRB 360 Manual De Propietario

Water rating

1 ATM*

Operating temperature range 
(external power)**

From -20 to 40° C (from -4 to 104° F)

Operating temperature range 
(battery power, cold start)**

From 0 to 40° C (from 32 to 104° F)

Operating temperature range 
(battery power, warm start)**

From -20 to 40° C (from -4 to 104° F)

Charging temperature range

From 0 to 40° C (from 32 to 104° F)

Input voltage

5 V, 2 A

Wireless frequencies and 
protocols

2.4 GHz Wi-Fi
2.4 GHz ANT+
2.4 GHz Bluetooth

*The device withstands pressure equivalent to a depth of 10 m. 

.

The device is not water resistant when either the battery door or 

side door is open.
**The operating temperature range is based on the default 

camera settings. Several factors may impact the operating 

temperature range, including the mount configuration, video 

settings, and Wi

‑Fi settings. Performance in cold environments 

is improved by starting the camera operation using a battery that 

has been stored at room temperature (

).

• The battery life and video recording performance of the 

camera are reduced at low temperatures. If the battery 

temperature is below 0°C (32°F), the battery may not provide 

enough power for the camera to operate or record video, and 

the camera may turn off.

• You can improve the camera's battery life and video 

recording performance in low temperatures by storing the 

camera battery at room temperature until you are ready to 

use it. If the battery is at room temperature when you turn on 

the camera, heat generated by the camera operation 

prevents the battery from becoming too cold, and the camera 

operates and records video in temperatures as low as 

-20°C (-4° F).

• You can store the battery indoors, in a heated vehicle, or in 

an empty, interior clothing pocket to keep it at room 

temperature. If the camera turns off due to a cold battery, you 

can place the battery in an empty pocket or in a room-

temperature environment to warm it.

Do not place the battery in a pocket with other objects, 

especially sharp or metal objects. Other objects may damage 

the battery and may present a risk of damage to the device, 

fire, chemical burn, electrolyte leak, and/or injury.

• If you turn off the camera for a long period of time in a low-

temperature environment, you should remove the battery and 

keep it at room temperature until you are ready to use the 

camera again.

From the About menu, select   > Regulatory Info.

Avoid contact with chemical cleaners, solvents, gasoline, oil, 

insect repellents, or sunscreen. These chemicals can damage 

plastic components and finish.

Thoroughly rinse the device with fresh water as soon as 

possible after exposure to chlorine, salt water, sunscreen, 

cosmetics, alcohol, or other harsh chemicals. Prolonged 

exposure to these substances can damage the plastic 

components and finish.
Do not store the device where prolonged exposure to extreme 

temperatures can occur, because it can cause permanent 

damage.

When the battery door and side door are closed and latched, the 

device has a water rating of 1 ATM.*
When using your device near liquids, you must observe these 

considerations and care tips to help preserve the water rating 

and avoid damage to the camera.
• The device is not water resistant when either the battery door 

or side door is open.

• You should keep the door gaskets and sealing surfaces clean 

and free of dust and debris.

• The device is not water resistant if the lens, lens retainer, or 

lens gasket are damaged or removed, or if the lens retainer is 

not fully tightened.
If you replace the cover lens, you must ensure the lens 

gasket and sealing surfaces are undamaged, clean, and free 

of dust and debris, and you must verify the lens retainer is 

fully tightened (

).

• You should thoroughly rinse the device as soon as possible 

after exposure to saltwater or chlorinated water.

*The device withstands pressure equivalent to a depth of 10 m. 

.

Wipe the outer casing of the device with a soft, non-scratch 

cloth dampened with water.

Wipe the device dry.

If either of the cover lenses become scratched or damaged, you 

can replace them. The VIRB 360 lens replacement kit includes 

two cover lenses, two gaskets, and two lens retainer rings. Go to 

 to purchase a lens replacement kit.

Turn the lens retainer ring counter-clockwise to unlock it.

Remove the lens retainer ring, cover lens 

À

, and gasket 

Á

.

Wipe the gasket groove 

Â

 with a lint-free cloth.

Verify the new cover lens, new gasket, and the gasket groove 

are clean and free of dust or debris.

The camera may not be water resistant if the gasket and 

sealing surface are not clean and free of dust or debris. Dust 

14

Device Information