Garmin vivofit® 3 Manual De Propietario
The arrow on the device must be aligned with the arrow
inside the band.
Replacing the Band
, or contact your Garmin dealer for
information about optional accessories.
1
Remove the device from the band.
2
Insert the device into the flexible silicone band by stretching
the band material around the device.
The arrow on the device must be aligned with the arrow
The arrow on the device must be aligned with the arrow
inside the band.
Installing the Device in the Belt Clip
NOTICE
Do not attach the belt clip to objects thicker than 6 mm.
You can use the optional belt clip to attach the device to your
waistband, belt, or shirt pocket. Go to
contact your Garmin dealer for information about optional
accessories.
1
Remove the device from the band.
2
Insert the device into the flexible silicone clip by stretching
the clip material around the device.
The arrow on the device must be aligned with the arrow on
The arrow on the device must be aligned with the arrow on
the clip.
To remove the device from the belt clip, grasp both sides of the
belt clip and twist the belt clip in opposite directions. Remove the
device by stretching the clip material around the device.
Troubleshooting
My step count does not seem accurate
If your step count does not seem accurate, you can try these
tips.
• Wear the device on your non-dominant wrist.
• Carry the device in your pocket when pushing a stroller or
• Wear the device on your non-dominant wrist.
• Carry the device in your pocket when pushing a stroller or
lawn mower.
• Carry the device in your pocket when actively using your
hands or arms only.
NOTE: The device may interpret some repetitive motions,
NOTE: The device may interpret some repetitive motions,
such as washing dishes, folding laundry, or clapping your
hands, as steps.
The step counts on my device and my
Garmin Connect account don't match
The step count on your Garmin Connect account updates when
you synchronize your device.
Troubleshooting
5