Sony HT-CT290 Manual De Propietario
17
US
BLUET
O
O
T
H Functions
4
Make sure that the BLUETOOTH
indicator on the Bar Speaker lights
up in blue.
Connection has been established.
indicator on the Bar Speaker lights
up in blue.
Connection has been established.
• Passkey may be called “Passcode”, “PIN
code”, “PIN number” or “Password”.
• You can pair up to 10 BLUETOOTH
devices. If the 11th BLUETOOTH device is
paired, the least recently connected
device will be replaced by the new one.
paired, the least recently connected
device will be replaced by the new one.
1
Turn on the BLUETOOTH function
of the paired BLUETOOTH device.
of the paired BLUETOOTH device.
2
Press INPUT repeatedly to select
“BT”.
The system automatically
reconnects to the BLUETOOTH
device it was most recently
connected to.
When the BLUETOOTH connection
is established, the BLUETOOTH
indicator on the Bar Speaker lights
up in blue.
“BT”.
The system automatically
reconnects to the BLUETOOTH
device it was most recently
connected to.
When the BLUETOOTH connection
is established, the BLUETOOTH
indicator on the Bar Speaker lights
up in blue.
3
Start playback on the BLUETOOTH
device.
device.
4
Adjust the volume.
• Adjust the volume of the
• Adjust the volume of the
BLUETOOTH device.
• Press
+/– to adjust the Bar
Speaker volume.
• Press SW
+/– to adjust the
subwoofer volume.
• Once the system and the BLUETOOTH
device are connected, you can control
playback by pressing
playback by pressing
and /.
• You can connect to the system from a
paired BLUETOOTH device even when the
system in standby mode, if you set the
BLUETOOTH standby mode to on
(page 17).
system in standby mode, if you set the
BLUETOOTH standby mode to on
(page 17).
• The audio playback on this system may
be delayed from that on the BLUETOOTH
device because of the characteristics of
the BLUETOOTH wireless technology.
device because of the characteristics of
the BLUETOOTH wireless technology.
To disconnect the BLUETOOTH
device
device
Perform any of the following items.
• Press
(pairing) on the Bar Speaker
again.
• Disable the BLUETOOTH function on
the BLUETOOTH device.
• Turn off the system or the BLUETOOTH
device.
Setting the BLUETOOTH
standby mode
standby mode
When the system has pairing
information, you can turn on the system
and listen to music from a BLUETOOTH
device even when the system is in
standby mode by setting the
BLUETOOTH standby mode to on.
information, you can turn on the system
and listen to music from a BLUETOOTH
device even when the system is in
standby mode by setting the
BLUETOOTH standby mode to on.
Hold down NIGHT for 5 seconds to
turn on or off the BLUETOOTH standby
mode.
turn on or off the BLUETOOTH standby
mode.
During BLUETOOTH standby mode,
standby power consumption increases.
standby power consumption increases.
Note
Listening to music from the
paired device
paired device
Note
On
The USB and TV indicators flash twice.
The USB and TV indicators flash twice.
Off
The USB indicator flashes twice.
The USB indicator flashes twice.
Note