Binatone T100T Manual De Usuario

Troubleshooting

25

•  Make sure that the Pet Collar Unit is properly fitted on your dog. Loosely 

fitted collar will affect performance. For proper fit, the collar should be snug, 
yet loose enough to allow two fingers to fit between the strap and your dog's 
neck. 

•  Make sure that there is good skin contact where the Metal Contacts touch 

the neck area. If necessary, trim your dog’s hair to ensure good contact. 

•  If you are certain that your dog is feeling the static correction, however is still 

not responding, try the next level higher (see “Determine the TRAINING 
LEVEL for your dog” on page 17).

•  Check if the battery has drained out.
•  Test the response of the Pet Collar Unit using the Test Light supplied with 

your Remote Training System (see “Using the Test Light” on page 14).

•  If your dog still does not respond, contact Customer Service at 

1-888-331-3383.

•  Make sure that the Pet Collar Unit is powered on (see “Powering On/Off the 

•  Make sure that the batteries are inserted properly (see “Remote Control Unit 

•  The maximum duration you can press the STATIC CORRECTION KEY 

  to deliver static correction to your dog continuously is 60 seconds. This 

is followed by a 30 seconds "rest" period. The Remote Control Unit will only 
send static correction to the Pet Collar Unit again after the 30 seconds "rest" 
period. 

•  If the Pet Collar Unit still does not respond, contact Customer Service at 

1-888-331-3383.