Video King Gaming Systems Inc. TRANS-1 Manual De Usuario
June 2004
RF Install Guide
e
-BOS
TM
2.1.x
Page 10 of 11
RF Configuration Checklist
Hardware Configuration Checklist
Hardware Configuration Checklist
Confirm that the PowerServer Hardlock supports RF mode.
On the PowerServer machine, ensure that the NIC has IP Address 192.168.8.10.
Ensure that this NIC is enabled and connected to the bingo network.
Ensure that this NIC is enabled and connected to the bingo network.
If the PowerServer machine is also connected to a corporate network, ensure that
the 2
the 2
nd
NIC has a static corporate IP address assigned to it. Ensure that this NIC is
enabled and connected to the corporate network.
On the PowerPlay machine, ensure that the NIC has IP Address 192.168.8.1.
Ensure that this NIC is enabled and connected to the bingo network.
Ensure that this NIC is enabled and connected to the bingo network.
If this is a dual desk environment, ensure that the bonanza desk has a NIC set to IP
Address 192.168.8.2. Ensure that this NIC is enabled and connected to the bingo
network.
Address 192.168.8.2. Ensure that this NIC is enabled and connected to the bingo
network.
Set the workgroup on all machines to the bingo workgroup (i.e. BINGO).
From the PowerServer machine, ping the PowerPlay machine (or ping both
PowerPlay machines, if this is a dual desk environment.)
PowerPlay machines, if this is a dual desk environment.)
Plug the Base Station into the supplied UPS. Plug the UPS into a standard 110/120
volt outlet
volt outlet
Connect the Base Station to the bingo network using straight-through CAT5 cabling.
From the PowerServer machine, ping the Base Station (IP Address 192.168.8.251)
to ensure connectivity.
to ensure connectivity.
Connect all remote transmitters to the Base Station using straight-through CAT5
cabling.
cabling.