BMI Technologies Inc. VUI00 Manual De Usuario
DRAFT G FORCE PLUS & G FORCE PLUS RF Instruction Manual
Doc #RF1 Rev.2
31
Nov 2005
i. Remove the Data Logger from the Software Interface and press Cancel. The LCD will display
“Action?(1-9)”
4. Repeat steps 1 and 2 for up to 8 (eight) more Vehicles, working through memory slots 2 to 9 and
recording the memory slot used for each Vehicle.
5. Place the Vehicle from memory slot #1 into Maintenance Lockout.
6. Program the Vehicle ID to the Vehicle Monitor.
6. Program the Vehicle ID to the Vehicle Monitor.
a. Press
Enter to start the Data Logger.
b. Press
5 when the LCD displays “Action?(1-9)”. The LCD will display “Action?(1-9) Prog Veh
ID”
c. Press
Enter to accept the choice. The LCD will display “Select Slot:”
d. Press
1 to select slot #1. The LCD will display “Select Slot: 1 Has Data”
e. Press
Enter to accept the choice. The LCD will display “Select Slot: 1 Ready”
f. Present the Data Logger to the Vehicle Interface.
g. Listen for a sequence of three quick beeps to indicate the interaction is complete.
h. Remove the Data Logger from the Vehicle Interface. The Vehicle Interface LCD will display
g. Listen for a sequence of three quick beeps to indicate the interaction is complete.
h. Remove the Data Logger from the Vehicle Interface. The Vehicle Interface LCD will display
“VEHICLE ID UPDATED”.
i. Press
Cancel on the Data Logger. The Data Logger LCD will display “Action?(1-9)”.
7. Program the Vehicle settings to the Vehicle Monitor.
j. Press
Enter to start the Data Logger.
k. Press
6 when the LCD displays “Action?(1-9)”. The LCD will display “Action?(1-9) Prog Veh
Settngs”
l. Press
Enter to accept the choice. The LCD will display “Select Slot:”
m. Press 1 to select slot #1. The LCD will display “Select Slot: 1 Has Data”
n. Press
n. Press
Enter to accept the choice. The LCD will display “Select Slot: 1 Ready”
o. Present the Data Logger to the Vehicle Interface.
p. Listen for a sequence of three quick beeps to indicate the interaction is complete.
q. Remove the Data Logger from the Vehicle Interface. The Vehicle Interface LCD will display
p. Listen for a sequence of three quick beeps to indicate the interaction is complete.
q. Remove the Data Logger from the Vehicle Interface. The Vehicle Interface LCD will display
“PROGRAMMING SETTNGS COMPLETE”
r. Press
Cancel on the Data Logger. The Data Logger LCD will display “Action?(1-9)”.
8. Remove the selected Vehicle Monitor from Maintenance Lockout.
9. Repeat steps 5 to 8 for the remaining Vehicles, matching the recorded Vehicles and memory slots.
Update Vehicle Monitor Settings
Each time there is a change to the Vehicle settings in the Fleet Manager software, the Data Logger must
be used to update, or reprogram, the Vehicle Monitor settings of the affected Vehicle(s).
be used to update, or reprogram, the Vehicle Monitor settings of the affected Vehicle(s).
NOTE!
When changes are made to System Settings and Authorization Groups,
all or many Vehicle Monitors may require updating.