Ophir Optronics Ltd QSR Manual De Usuario
Appendix C – Getting the most from the Quasar
Troubleshooting the Quasar
When using a regular Quasar device, the serial number of both the attached head,
and the Quasar device itself, are displayed in the Select Devices screen. The
serial number of the head is displayed on the left, and the serial number of the
Quasar device is displayed on the right. See below in Figure C-4 .
and the Quasar device itself, are displayed in the Select Devices screen. The
serial number of the head is displayed on the left, and the serial number of the
Quasar device is displayed on the right. See below in Figure C-4 .
Figure C-4 Select Devices Screen
When using a thermo head with integral Quasar device, the serial number
displayed on the back of the combined unit will be the serial number of the head.
The Quasar device also contains an internal serial number, which is not
displayed on the combined unit. This internal serial number is also displayed in
the Select Devices screen, as it would be for a normal (non-integral) Quasar
device.
displayed on the back of the combined unit will be the serial number of the head.
The Quasar device also contains an internal serial number, which is not
displayed on the combined unit. This internal serial number is also displayed in
the Select Devices screen, as it would be for a normal (non-integral) Quasar
device.
Troubleshooting the Quasar
If there are problems establishing a connection between the Quasar and the PC,
follow these steps to try and locate the problem.
follow these steps to try and locate the problem.
Bring the Quasar closer to the PC radio and try again to connect. If the
connection is ok, you should work closer to the PC, or upgrade to the
ER option.
connection is ok, you should work closer to the PC, or upgrade to the
ER option.
•
•
•
•
•
•
If using the Bluetooth USB Adapter, check that it is correctly plugged
into the PC. If it is already plugged in correctly, try unplugging it and
plugging it in again to refresh the control software.
into the PC. If it is already plugged in correctly, try unplugging it and
plugging it in again to refresh the control software.
If using a built-in radio in the PC, check that it is switched on
correctly. If it is already switched on correctly, try switching it off and
on again to refresh the control software.
correctly. If it is already switched on correctly, try switching it off and
on again to refresh the control software.
Try closing the StarLab application and reopening it.
Click on Help – About in the StarLab application, and check the
software version that is installed on the PC. Check on the Ophir
website (
software version that is installed on the PC. Check on the Ophir
website (
) for the latest release software version,
and if necessary upgrade to the latest version.
StarLab User Guide
110