HydroPoint data systems inc. WT008 Manual De Usuario
Setting the Radio Antenna
There are two options for setting the radio antenna:
•
•
Internal, (which is the default), and
•
External.
Usually, you will use the internal antenna.
In some areas, the internal antenna may not function due to local
topography or interference from metal items, such as mounting the
controller inside a steel cabinet. You can install an external antenna to
allow the controller to receive a better signal.
topography or interference from metal items, such as mounting the
controller inside a steel cabinet. You can install an external antenna to
allow the controller to receive a better signal.
To set the antenna:
1.
Turn the Upper Line dial until you see:
2.
Turn the Lower Line dial to select “Internal” or “External.”
3.
Turn the Upper Line dial until you see:
You can purchase a kit that has the connection cable and antenna.
Please call your local distributor or HydroPoint Sales for more
information.
Please call your local distributor or HydroPoint Sales for more
information.
You are ready to activate your WeatherTRAK ET plus Controller!
Please call us now at: (800) 362-8774.
Please call us now at: (800) 362-8774.
* Note: Activation should take 5 minutes to complete. Be sure to
have your program settings worksheet and the serial number when
you call.
have your program settings worksheet and the serial number when
you call.
SETUP COMPLETE
RADIO ANTENNA
Internal
Setting Up Your WeatherTRAK ET Plus
22