CommScope Technologies LLC IPBTS-C30-1900 Manual De Usuario
Chapter 4
l
RN commissioning
Connecting the laptop to the ipBTS C30
Airvana ipBTS C30 Installation and Commissioning, Release 4.0
4-7
Connecting the laptop to the ipBTS C30
Follow this procedure to establish a serial connection between your laptop and the ipBTS C30.
1. Verify the ipBTS C30 is powered on. (See
•
If the ipBTS C30 is powered on, continue with
.
2. Connect one end of the RS-232 serial cable to your laptop’s serial port and the other end to
the ipBTS C30’s serial port.
3. Power on your laptop..
Sectors
sectorIndex
The index of the sector to which this SectorElement is bound. Range: {1..65535}.
Note:
The SectorIndex can be changed only when the status of this
SectorElement object is down (1).
sector Latitude North
The geographic latitude of the center of the antenna array serving the sector.
Range: {-90,000 to 90,000} 1/1000 of a degree North and South of Equator.
When configuring this attribute from the EMS, a negative value denotes South
and positive denotes North. When configuring from the CLI, specify North or
South. Default (0).
Range: {-90,000 to 90,000} 1/1000 of a degree North and South of Equator.
When configuring this attribute from the EMS, a negative value denotes South
and positive denotes North. When configuring from the CLI, specify North or
South. Default (0).
sector Longitude East
The longitude of the center of the antenna array serving this sector. {-180,000 to
180,000} 1/1000 of a degree East and West of the Prime Meridian.When
configuring this attribute from the EMS, a negative value denotes West and
positive denotes East. When configuring from the CLI, specify East or West.
Default (0).
180,000} 1/1000 of a degree East and West of the Prime Meridian.When
configuring this attribute from the EMS, a negative value denotes West and
positive denotes East. When configuring from the CLI, specify East or West.
Default (0).
Carriers
ChannelNumber
The channel number within the BandClass on which the carrier is to operate. The
default value is (2047).
default value is (2047).
CellRadius
The size of the cell corresponding to the SectorElement, specified in chips.
Range: {0...512} with the default value (0).
Range: {0...512} with the default value (0).
AccessCycleDuration
The access cycle duration, measured in slots. Values: (8, 16, 32, 64, 128) with the
default value (64).
default value (64).
Modem
Mode
The mode of the modem. Range: unknown (1), other (2), oneCarrierOneSector
(3), oneCarrierThreeSector (4), twoCarrierBiSectorOmni (5).
(3), oneCarrierThreeSector (4), twoCarrierBiSectorOmni (5).
ipBTS C30
OperStatus
The operational status of the ipBTS C30. Range: unknown (1), other (2), down
(3), up (4), test (5), fault (6).
(3), up (4), test (5), fault (6).
AdminStatus
The administrative status. Range: down (1), up (2), test (3).
LastChangeTime
The last time the operational status changed.
RNC
Priority
The priority of the RNC. Range: {0..1000} with the default (0).
Table 4-3.
Configuration parameters (continued)
Object
Parameter
Description