Manualsbrain.com
  1. Manuales
  2. Marcas
  3. Cisco Systems
  4. 102053
  5. Manual De Usuario

Cisco Systems 102053 Manual De Usuario

Descargar
Página de 150
  C I S C O   C O N F I D E N T I A L   -     D r a f t   2
5-5
Cisco Aironet 1200 Series Access Point Hardware Installation Guide
OL-4310-03
Chapter 5      Using the Command-Line Interface
Using Editing Features
The range is from 0 to 256.
Beginning in line configuration mode, enter this command to configure the number of command lines 
the access point records for all sessions on a particular line:
ap(config-line)# history 
[
size
 number-of-lines
]
The range is from 0 to 256.
Recalling Commands
To recall commands from the history buffer, perform one of the actions listed in 
Disabling the Command History Feature
The command history feature is automatically enabled. 
To disable the feature during the current terminal session, enter the terminal no history privileged 
EXEC command. 
To disable command history for the line, enter the no history line configuration command.
Using Editing Features
This section describes the editing features that can help you manipulate the command line. It contains 
these sections:
•
•
•
Table 5-4
Recalling Commands
Action
1
1.
The arrow keys function only on ANSI-compatible terminals such as VT100s.
Result
Press Ctrl-P or the up arrow key.
Recall commands in the history buffer, beginning with the most recent command. 
Repeat the key sequence to recall successively older commands.
Press Ctrl-N or the down arrow key.
Return to more recent commands in the history buffer after recalling commands 
with Ctrl-P or the up arrow key. Repeat the key sequence to recall successively 
more recent commands. 
show history
While in privileged EXEC mode, list the last several commands that you just 
entered. The number of commands that are displayed is determined by the setting 
of the terminal history global configuration command and history line 
configuration command.