Cisco Systems 102053 Manual De Usuario
C I S C O C O N F I D E N T I A L - D r a f t 2
6-4
Cisco Aironet 1200 Series Access Point Hardware Installation Guide
OL-4310-03
Chapter 6 Mounting Instructions
Mounting Below a Suspended Ceiling
Mounting Below a Suspended Ceiling
Note
To comply with NEC code, a #10-24 grounding lug is provided on the mounting bracket.
You should review
before beginning the mounting process.
Figure 6-2
Mounting Bracket Parts
Follow these steps to mount your access point on a suspended ceiling:
Step 1
Decide where you want to mount the access point.
Step 2
Attach two caddy fasteners to the suspended ceiling T-rail.
Step 3
Use the mounting bracket to adjust the distance between the caddy fasteners so that they align with the
holes in the mounting bracket.
holes in the mounting bracket.
Step 4
Use a standard screwdriver to tighten the caddy fastener studs in place on the suspended ceiling T-rail.
Do not overtighten.
Do not overtighten.
Step 5
Install a plastic spacer on each caddy fastener stud. The spacer’s legs should contact the suspended
ceiling T-rail.
ceiling T-rail.
Step 6
Attach the mounting bracket to the caddy fastener studs and start a Keps nut on each stud.
1
Suspended ceiling T-rail
4
Mounting bracket
2
Caddy fastener
5
Keps nut (contains an attached lock washer)
3
Plastic spacer
1
2
2
3
5
3
4
5
74121