Adtran TRC4106 Manual De Usuario
TRACER 4206 System Manual
Section 5, User Interface Guide
612804206L1-1B
© 2002 ADTRAN, Inc.
59
>T1D S
TATUS
/C
ONFIGURATION
/L
OOPBACK
Figure 20 shows the T1D Status/Configuration/Loopback menu page. Real-time graphical representation
for the T1D link (using data from both the local and remote TRACER 4106/4206 units) is displayed on this
page. T1D operational configuration parameters and testing functions are configured from this menu.
for the T1D link (using data from both the local and remote TRACER 4106/4206 units) is displayed on this
page. T1D operational configuration parameters and testing functions are configured from this menu.
Figure 20. T1D Status/Configuration/Loopback
>T1D S
TATUS
/C
ONFIGURATION
/L
OOPBACK
> T1D I
NTERFACE
A
LARMS
Displays and active alarms on the T1D link reported from both the local and remote TRACER 4106/4206
units. These alarms include Red, Blue, Yellow, AIS, and bipolar violations (BPV). See Table 1 on page
50, for more information on these alarms.
units. These alarms include Red, Blue, Yellow, AIS, and bipolar violations (BPV). See Table 1 on page
50, for more information on these alarms.
>T1D S
TATUS
/C
ONFIGURATION
/L
OOPBACK
> T1D L
INE
B
UILD
O
UT
Configures the T1D for the appropriate line buildout, based on the distance to the T1D equipment.
>T1D S
TATUS
/C
ONFIGURATION
/L
OOPBACK
> A
LARM
R
EPORTING
Determines whether the TRACER 4106/4206 unit will report active alarms. If
D
ISABLED
, no alarms will
be displayed on this menu page. The Alarm Reporting parameter is independently configured for local and
remote TRACER 4106/4206 units. When
remote TRACER 4106/4206 units. When
D
ISABLED
, the front panel LED alarms will also be disabled (off).
Press <7> from any menu in the TRACER 4106/4206 VT100 menu structure to access the
T1D Status/Configuration/Loopback menu page.
T1D Status/Configuration/Loopback menu page.