Trimble Inc. 6848090 Manual De Usuario
SNB900 Radio-Modem User Guide 9
Getting Started 2
2.4
Menus
When you start the SNB900 radio-modem, the default Status menu
screen is displayed on the front panel. This screen shows a summary of
the radio-modem’s configuration settings.
screen is displayed on the front panel. This screen shows a summary of
the radio-modem’s configuration settings.
24.1
Selecting a menu
To move to a different menu, press the
button on the front panel
display. To scroll through the available settings in a menu, press the Up
button
button
or the Down button
.
24.2
Main menus
lists each main menu and describes its use.
Note –
The radio-modem unit settings determine which menus are
available.
Table 2.1
Main menus
Use this menu ...
To ...
For details, see ...
Status
View information about the operation of the
radio.
radio.
Network
Select an operating network for the radio-
modem. Each network has a unique hopping
pattern to help reduce interference from nearby
radio transmitters.
modem. Each network has a unique hopping
pattern to help reduce interference from nearby
radio transmitters.
Mode
Specify whether the radio-modem is to operate
as a base, a rover, or as one of up to four
repeaters.
as a base, a rover, or as one of up to four
repeaters.
Turbo Mode
Enable or disable Turbo mode. Use Turbo mode
in areas of high RF interference to improve
performance.
in areas of high RF interference to improve
performance.
Port Config
LEMO Port Config
Modem Port Config
LEMO Port Config
Modem Port Config
Configure the settings for two of the ports that
are on the back of the radio-modem (the seven-
pin LEMO port and the 26-pin Modem port).
are on the back of the radio-modem (the seven-
pin LEMO port and the 26-pin Modem port).
Display Config
Configure when the display will power down.