TransCore IT241005422 Manual De Usuario
IT2410 Tag Programmer User Guide
4-4
Figure 4-1 IT2410 Tag Programmer System
Note: To maintain FCC Part 15 Class B compliance, operate the tag programmer in
a horizontal position.
a horizontal position.
Connecting the IT2410 Tag Programmer to a PC
Use the following procedure to connect the equipment:
1.
Place the tag programmer on a flat, stable surface.
2.
Connect the power supply to the power socket on the tag programmer’s back
panel.
panel.
3.
Connect the power supply plug to a properly grounded — three-prong — AC
outlet.
outlet.
4.
Connect the PC-to-programmer RS–232 serial cable to the COM1 port on the
PC. Connect the other cable end to the RS–232 connector on the tag
programmer’s back panel.
PC. Connect the other cable end to the RS–232 connector on the tag
programmer’s back panel.