TransCore IT241005422 Manual De Usuario
IT2410 Tag Programmer User Guide
D-24
Data associated with the tag programmer RF is listed in Table D-24.
Table D-24 Programmer RF
RF control — This subfield contains a representation of the frequency control as a
binary-coded integer. Valid values are in the range of 0BH to 11H determining the
emission frequency in 1-MHz steps from 912.75 MHz to 918.75 MHz.
binary-coded integer. Valid values are in the range of 0BH to 11H determining the
emission frequency in 1-MHz steps from 912.75 MHz to 918.75 MHz.
Get/Set Time/Date
The Get Time/Date command requests the current time and date that is set on the pro-
grammer’s clock. The Set Time/Date command sets the programmer’s real-time clock
to the time and date specified in the request data.
grammer’s clock. The Set Time/Date command sets the programmer’s real-time clock
to the time and date specified in the request data.
The data associated with the Get/Set Time/Date defines the format of the time and
date (Table D-25). You can modify and read this data at any time. This field is used
with the tag read parameters to append time and date to any response to the host.
date (Table D-25). You can modify and read this data at any time. This field is used
with the tag read parameters to append time and date to any response to the host.
Table D-25 Time/Date Data
The range specifications for the individual time/date fields are shown in Table D-26
Bits 7 - 0
RF control
Byte
Bit 7
0
Hours
1
Minutes
2
Seconds
3
Hundredths of seconds
4
Month
5
Day
6
Year