Climax Technology Co Ltd CTC1052RV Manual De Usuario

27 

microphone are adjusted in the two-way 
communication mode, the adjusted value 
will be restored. 

 

) 

If the two way communication is setup 
between WTRV/ WTRVS and the 
emergency call recipient, the levels of 
speaker volume and microphone 
sensitivity can not be adjusted.  

z  The allowable time duration for Follow-On 

Period is set by Command #46 (1-10 mins). 

z  During Two-way Voice Communication, at 

20 & 10 seconds before the Follow-On 
period expires, CTC-1052RV will emit two 
beeps to alert both the user and the 
Monitoring Center Personnel. 

z  To extend the conversation, the Monitoring 

Center personnel can press the DTMF 
command again to add another 1-10 mins. 

z  Voice Communication can be terminated 

by the following:

„ DTMF 

Commands: 

Tunstall:       #  

„ The 

RESET button is pressed. 

„ 

Automatically hangs up after the 
Follow-On Period expires.

z 

„  Once the Follow-On Period or Call-

back is completed, CTC-1052RV will 
start counting down the 15-min Help 
Arrived Timer. The HELP  button 
starts flashing. 

„ 

By pressing the RESET button, CTC-
1052RV will report to the Monitoring 
Center that help has arrived.  The 
HELP  button stops flashing and 
return to normal backlight. 

„ If 

the RESET  button  is not pressed 

within 15 mins, CTC-1052RV will 
send another Help Call report again 
to inform the Monitoring Center that 
no help has arrived. 

„  CTC-1052RV will then enter the 15 

mins waiting period again. If RESET 
button  is still not pressed, CTC-
1052RV will exit reporting mode and 
return to Idle Mode. 

 

z  If Speech Reporting Method is selected, 

after dialing, CTC-1052RV will open a two-
way voice communication between the 
Call Recipient and CTC-1052RV for 1-10 
minutes (set by Command #46).  

z  If the alarm is triggered by Talking 

Pendent (WTRV or WTRVS), after the 
Central Monitoring Station acknowledges 
the signal emitted from WTRV/WTRVS 
and then WTRV/WTRVS receives the 
DTMF 2 signal (pressed by the Monitoring 
Center), a remote two-way voice 
communication between the Monitoring 
Center and WTRV/WTRVS will be opened. 

z  At 20 & 10 seconds before the time period 

expires, CTC-1052RV will emit two beeps 
via the telephone handset to alert the user. 

z  If the Call Recipient needs more talk time, 

they can press any keys except 9 on their 
phone set to add another 1-10 minutes 
(set by Command 46).  

z  To terminate the call, press either (DTMF 

9) or RESET button on CTC-1052RV. 

z  During the Speech period, if there is no 

any DTMF command pressed, the call will 
automatically hang-up and be recorded as 
an unsuccessful call. It will retry a max of 
4 times on each Tel. Number accordingly. 

z  To terminate the call, press either (DTMF 

9),  RESET button on CTC-1052RV, or 
hold the Pendent Button for

 

8 sec on the 

Talking Pendant (WTRV). 

 

„ 

The call sequence is followed by Tel. 
#1, Tel. #2, Tel. #3 to Tel. #4. It is 
recommended to set digital reporting 
method in first priority for immediate 
help. 

„  If either Digital Alarm reporting or 

Speech Alarm reporting is set, with 
anyone answered successfully, the 
call sequence will be terminated 
automatically.