Climax Technology Co Ltd CTC1052RV Manuale Utente
27
microphone are adjusted in the two-way
communication mode, the adjusted value
will be restored.
communication mode, the adjusted value
will be restored.
)
If the two way communication is setup
between WTRV/ WTRVS and the
emergency call recipient, the levels of
speaker volume and microphone
sensitivity can not be adjusted.
between WTRV/ WTRVS and the
emergency call recipient, the levels of
speaker volume and microphone
sensitivity can not be adjusted.
z The allowable time duration for Follow-On
Period is set by Command #46 (1-10 mins).
z During Two-way Voice Communication, at
20 & 10 seconds before the Follow-On
period expires, CTC-1052RV will emit two
beeps to alert both the user and the
Monitoring Center Personnel.
period expires, CTC-1052RV will emit two
beeps to alert both the user and the
Monitoring Center Personnel.
z To extend the conversation, the Monitoring
Center personnel can press the DTMF
command again to add another 1-10 mins.
command again to add another 1-10 mins.
z Voice Communication can be terminated
by the following:
DTMF
Commands:
Contact ID: 9
Scancom: 5
Tunstall: #
The
RESET button is pressed.
Automatically hangs up after the
Follow-On Period expires.
Follow-On Period expires.
z
Help Arrived Signaling
This function is only available for the digital
Contact ID reporting method, and when
Help Arrive Signaling (Command #33) is set
to enable.
Contact ID reporting method, and when
Help Arrive Signaling (Command #33) is set
to enable.
Once the Follow-On Period or Call-
back is completed, CTC-1052RV will
start counting down the 15-min Help
Arrived Timer. The HELP button
starts flashing.
start counting down the 15-min Help
Arrived Timer. The HELP button
starts flashing.
By pressing the RESET button, CTC-
1052RV will report to the Monitoring
Center that help has arrived. The
HELP button stops flashing and
return to normal backlight.
1052RV will report to the Monitoring
Center that help has arrived. The
HELP button stops flashing and
return to normal backlight.
If
the RESET button is not pressed
within 15 mins, CTC-1052RV will
send another Help Call report again
to inform the Monitoring Center that
no help has arrived.
send another Help Call report again
to inform the Monitoring Center that
no help has arrived.
CTC-1052RV will then enter the 15
mins waiting period again. If RESET
button is still not pressed, CTC-
1052RV will exit reporting mode and
return to Idle Mode.
button is still not pressed, CTC-
1052RV will exit reporting mode and
return to Idle Mode.
Speech Reporting Method
z If Speech Reporting Method is selected,
after dialing, CTC-1052RV will open a two-
way voice communication between the
Call Recipient and CTC-1052RV for 1-10
minutes (set by Command #46).
way voice communication between the
Call Recipient and CTC-1052RV for 1-10
minutes (set by Command #46).
z If the alarm is triggered by Talking
Pendent (WTRV or WTRVS), after the
Central Monitoring Station acknowledges
the signal emitted from WTRV/WTRVS
and then WTRV/WTRVS receives the
DTMF 2 signal (pressed by the Monitoring
Center), a remote two-way voice
communication between the Monitoring
Center and WTRV/WTRVS will be opened.
Central Monitoring Station acknowledges
the signal emitted from WTRV/WTRVS
and then WTRV/WTRVS receives the
DTMF 2 signal (pressed by the Monitoring
Center), a remote two-way voice
communication between the Monitoring
Center and WTRV/WTRVS will be opened.
z At 20 & 10 seconds before the time period
expires, CTC-1052RV will emit two beeps
via the telephone handset to alert the user.
via the telephone handset to alert the user.
z If the Call Recipient needs more talk time,
they can press any keys except 9 on their
phone set to add another 1-10 minutes
(set by Command 46).
phone set to add another 1-10 minutes
(set by Command 46).
z To terminate the call, press either (DTMF
9) or RESET button on CTC-1052RV.
z During the Speech period, if there is no
any DTMF command pressed, the call will
automatically hang-up and be recorded as
an unsuccessful call. It will retry a max of
4 times on each Tel. Number accordingly.
automatically hang-up and be recorded as
an unsuccessful call. It will retry a max of
4 times on each Tel. Number accordingly.
z To terminate the call, press either (DTMF
9), RESET button on CTC-1052RV, or
hold the Pendent Button for
hold the Pendent Button for
8 sec on the
Talking Pendant (WTRV).
Call Sequence
The call sequence is followed by Tel.
#1, Tel. #2, Tel. #3 to Tel. #4. It is
recommended to set digital reporting
method in first priority for immediate
help.
#1, Tel. #2, Tel. #3 to Tel. #4. It is
recommended to set digital reporting
method in first priority for immediate
help.
If either Digital Alarm reporting or
Speech Alarm reporting is set, with
anyone answered successfully, the
call sequence will be terminated
automatically.
anyone answered successfully, the
call sequence will be terminated
automatically.