GatesAir Inc. UAXFLID Manual De Usuario
10/6/10
888-2721-001
2-3
WARNING: Disconnect primary power prior to servicing.
Section 2 Installation / Initial Turn-On
Maxiva UAX Transmitter Indoor System
User Manual
Select a cabinet location that allows adequate room in front and rear of transmitter to
allow for removal of PA modules, opening of doors etc.
allow for removal of PA modules, opening of doors etc.
The four (4) Lifting Eye bolts screw into the top of the transmitter cabinet. One in each
corner. See Figure 2-2.
corner. See Figure 2-2.
Figure 2-2 Lifting Eye Bolt On Top of Transmitter Cabinet
STEP 1
Install the lifting eyes. Be sure each lifting eye bolt is screwed all the
way in. Tighten the bolts in place using a wrench handle or bar.
STEP 2
Use an adequately sized hoist to lift the enclosure to its permanent
location.
STEP 3
Be sure the enclosure is level and securely positioned.
STEP 4
Remove lifting eyes (optional).