Shure QLXD2L50 Manual De Usuario

17

Do Not Duplicate or Redistribute

1

2

3

4

7

8

9

6

5

10

When Hardware Identify is triggered from a receiver, the corresponding representation of that receiver is flashed in the WWB inventory display, allowing 

for remote identification.
Hardware Identify can be triggered from the receiver by pressing and holding the enter button for at least 3 seconds. Click the Dismiss button on the 

WWB Inventory screen to exit the function.

Managing QLX-D with Wireless Workbench 6

Shire’s Wireless Workbench 6 (WWB6) software enables networked monitoring and control of the QLX-D receiver. Additional tools in WWB6 offer RF 

spectrum monitoring, network configuration, and firmware updating.
Visit: www.shure.com/wwb for a free download of Wireless Workbench software.

Manage and monitor receiver settings by opening the Monitor tab in 

Wireless Workbench. Click on the Settings button to show or hide the full 

Properties window.
① RF and Audio Meters

Displays: current levels, band, TV, and TX Overload

Displays: RF Power, Tx Type, Mic Offset, Tx Lock

Use drop-down to edit frequency value

Illuminates when Encryption is enabled

Use drop-down to increase or decrease gain settings

Click to enter to create custom groups

Access receiver functions

Set network mode, view: IP address, Subnet, MAC, Firmware version, 

Network reset

Enable/Disable Encryption

Lock/Unlock: Menu, Gain, Power

Click on the Inventory tab to view the receiver channels. Double-click on 

parameters to enable editing.

Tip: Clicking on the receiver icon next to the channel name flashes the front panel 

LEDs on the receiver for remote identification.