Mindray DS USA Inc. WT0707-00000 Manual De Usuario

9.2

Touch Screen Tab 

The Touch Screen tab provides a means to turn the touch screen on and off and recalibrate 
(or reset) the touch screen. This tab is available at the ViewStation and the WorkStation, and 
it functions in the same manner as it does at the host central station. Touch Screen tab 
changes made at the central station or remote workstations are independent of each other.

9.2.1

Accessing the Touch Screen Tab

1. From the menu bar, select the System Setup button. The first set of System Setup 

tabs is displayed.

2. Select the Touch Screen tab. A Touch Screen On/Off and Recalibrate Touch 

Screen button is displayed in the tab (shown in FIGURE 9-2).

3. For further instructions, refer to sections Turning the Touch Screen On or Off and 

FIGURE 9-2 Touch Screen tab 

9.2.1.1

Turning the Touch Screen On or Off 

The touch screen may be turned on or off by selecting the Touch Screen On/Off button. If the 
touch screen is turned off, a mouse is required to navigate. When the touch screen is turned 
off, the message Touch Screen Off will be displayed in the lower left corner of the screen 
in the System Status line. By default, the touch screen is turned on. 

9.2.1.2

Recalibrating the Touch Screen

The touch screen should be recalibrated whenever the touch interface becomes difficult to 
maneuver. By default the 

1. From the menu bar, select the System Setup button. The first set of System Setup 

tabs is displayed.

2. Select the Touch Screen tab. 

3. Select the Recalibrate Touch Screen button. The recalibration process is initiated