Mindray DS USA Inc. WT0707-00000 Manual De Usuario
Panorama™ Operating Instructions
0070-10-0690-01
9 - 5
System Setup Functions
Touch Screen Tab
FIGURE 9-3 Recalibration Screen (Part I)
4. Touch the red targets on the screen as instructed. Three calibration targets will be
displayed.
NOTE:
The messages in the Recalibrate Touch Screen display are
always displayed in the English language.
always displayed in the English language.
NOTE:
During the recalibration process, the patient tiles, menu bar,
and sidebar buttons will be replaced by the recalibration
screen.
and sidebar buttons will be replaced by the recalibration
screen.
5. Once the three targets have been touched, the message Touch the screen. Does the
cursor follow your finger? is displayed (shown in FIGURE 9-5).
Select either the
or
button.
• Select the
button if the targets moved as they were selected. Once selected, the
screen is recalibrated.
• Select the
button if the targets did not move as they were selected. Once selected,
the recalibration process begins again.
NOTE:
When the central station, ViewStation, or WorkStation uses
a dual display configuration, recalibration will affect both
touch screen displays. The first touch screen display will be
calibrated and then the second.
a dual display configuration, recalibration will affect both
touch screen displays. The first touch screen display will be
calibrated and then the second.