Mindray DS USA Inc. WT0707-00000 Manual Do Utilizador

Panorama™ Operating Instructions

0070-10-0690-01

9 - 5

System Setup Functions

Touch Screen Tab

FIGURE 9-3 Recalibration Screen (Part I)

4. Touch the red targets on the screen as instructed. Three calibration targets will be

displayed.

NOTE:

The messages in the Recalibrate Touch Screen display are
always displayed in the English language.

NOTE:

During the recalibration process, the patient tiles, menu bar,
and sidebar buttons will be replaced by the recalibration
screen.

5. Once the three targets have been touched, the message Touch the screen. Does the

cursor follow your finger? is displayed (shown in FIGURE 9-5).

Select either the

button.

• Select the

button if the targets moved as they were selected. Once selected, the

screen is recalibrated.

• Select the

button if the targets did not move as they were selected. Once selected,

the recalibration process begins again.

NOTE:

When the central station, ViewStation, or WorkStation uses
a dual display configuration, recalibration will affect both
touch screen displays. The first touch screen display will be
calibrated and then the second.