Mindray DS USA Inc. WT0707-00000 Manual De Usuario

9.14

Unit Choices Tab

The Unit Choices tab (shown in FIGURE 9-38, FIGURE 9-39, and FIGURE 9-40) determines 
the initial units of measure, configures the default pacemaker settings, and selects which 
patient demographic information is displayed. This tab is available at the ViewStation and 
WorkStation, and it functions in the same manner as it does at the host central station but 
contains different buttons. Unit Choices tab changes made at the central station or remote 
workstations are independent of each other.

9.14.1

Accessing the Unit Choices Tab (Central Station)

1. From the menu bar, select the System Setup button. The first set of System Setup tabs 

is displayed.

2. Follow the directions in the "Entering a Password" section on page 9-7.

3. Once the correct password has been entered, the tabs associated with the System 

Setup button are displayed. 

4. Select the More tab. The next set of System Setup tabs is displayed. 

5. Select the Unit Choices tab. The Unit Choices tab is displayed.

FIGURE 9-38 Unit Choices Tab - Paging Option Disabled (Central Station)

 

FIGURE 9-39 Unit Choices Tab - Paging Option Enabled (Central Station)

9.14.2

Accessing the Unit Choices Tab (ViewStation and WorkStation)

1. Follow steps 1-4 from the "Accessing the Unit Priorities Tab" section.

2. Select the Unit Choices tab. The Unit Choices tab is displayed.