UTC Fire & Security Americas Corporation Inc 910C-SIMON Manual De Usuario

Simon XT

Installation Manual

Exit extend

On 

Determines whether the panel restarts the exit delay time if the user enters the armed 
premises during the initial exit delay period (on), or not (off). Turning on this feature 
allows users to reenter during the exit delay period, without disarming and then 
rearming the system. Turning off this feature requires the user to disarm and rearm the 
system. 

Note:  Autoarm must be on for this option to work.

Secure arming

Off 

Determines whether an access code is required when arming the system  (on) or not 
(off). This option does not affect keyfob arm/disarm operation.

No arm on low 
battery

Off 

Determines whether the system protests arming if a low CPU battery condition exists 
(on) or not (off).

Quick exit

Off 

Determines whether pressing DISARM when the system is armed activates the exit 
delay time to allow exit and reentry without disarming the system (on) or not (off).
This feature is useful if the user wants to step outside briefly and return, such as to get 
the paper.  If the system is armed and the user presses DISARM, the panel announces 
Exit time is ON and sounds exit delay beeps.  This allows a designated entry/exit door to 
be open for up to 2 minutes without causing alarm.  When the door is closed, the beeps 
stop and the door is armed again.

Note:  For UL listed systems, Quick Exit must be Off. 

Downloader 
enable 

On 

Enables programming of system options with downloader software.

Sup protest 

Off 

Determines whether the panel protests arming if it has not received a supervisory 
signal from any sensor 15 minutes before arming (on) or not (off).  

Note:  This feature must be turned off for US installations.  

a.

Not investigated for use by UL.