UTC Fire & Security Americas Corporation Inc 910C-SIMON Manual De Usuario
Simon XT
Installation Manual
54
Audio verification options
Table 25 provides audio verification option details.
Note: These options have not been investigated for use by UL.
Light control (optional)
If your system uses optional X10 modules, you can program them to control lights.
Note: This feature has not been investigated for use by UL.
X10 module operation
Use the following procedure to program X10 module operations into panel memory.
To program the housecode:
1. Press the scroll buttons until the panel displays System programming.
Table 25. Audio verification
Function
Default
Description
Audio mode
Off
1 = Instant. Panel stays online with central station for an instant audio session.
2 = Callback. Panel hangs up and waits for a callback from the central station operator
before starting an audio session.
Off = No audio verification.
2 = Callback. Panel hangs up and waits for a callback from the central station operator
before starting an audio session.
Off = No audio verification.
Fire shutdown
Off
Determines whether system Fire sirens are silenced during a two-way audio session (on)
or not (off). Beeps sound every 10 seconds while sirens are silenced.
or not (off). Beeps sound every 10 seconds while sirens are silenced.
Panic talk
Off
Determines whether the central station operator can talk to the user during a silent
alarm (off) or just listen in on the premises (on). Silent alarms occur when sensors
learned into groups 02 or 03 are tripped, when the duress code is entered, or when the
panel Police button is pressed and the Silent Panel Police Panic option is turned on.
alarm (off) or just listen in on the premises (on). Silent alarms occur when sensors
learned into groups 02 or 03 are tripped, when the duress code is entered, or when the
panel Police button is pressed and the Silent Panel Police Panic option is turned on.
Vox Rx gain
06
Determines the receiver gain level during two-way audio sessions. If the VOX is
switching the speaker on when the central station operator is not talking, lower both
this setting and the VOX mic gain setting. If the VOX is not switching the speaker on
when the central station operator is talking, raise this setting and lower VOX Mic Gain
setting. Changing this setting does not affect speaker volume.
switching the speaker on when the central station operator is not talking, lower both
this setting and the VOX mic gain setting. If the VOX is not switching the speaker on
when the central station operator is talking, raise this setting and lower VOX Mic Gain
setting. Changing this setting does not affect speaker volume.
Vox mic gain
24
Sets the mic gain (sensitivity) that triggers the voice-activated switching (VOX). Room
size, acoustics, and furnishings where the panel or Interrogator 200 are located will
influence the setting. Gain range is 01 (lowest) to 64 (highest).
size, acoustics, and furnishings where the panel or Interrogator 200 are located will
influence the setting. Gain range is 01 (lowest) to 64 (highest).
Vox mic gain rng 64
Sets the gain range for voice-activated switching (Vox). Range is 01 (lowest) to 64
(highest). For best results, this option should be set equal to or greater than Vox mic
gain.
(highest). For best results, this option should be set equal to or greater than Vox mic
gain.
Note: This option works in conjunction with Vox mic gain. It is important to follow the
setting recommendations as described to achieve acceptable operation.
Manual mic gain 64
Determines the gain level (sensitivity) during two-way audio sessions when audio mode
is set to 0 or 1 (speak). Room size, acoustics, and furnishings where the panel is located
will influence the setting. Gain range is 01 (lowest) to 64 (highest).
is set to 0 or 1 (speak). Room size, acoustics, and furnishings where the panel is located
will influence the setting. Gain range is 01 (lowest) to 64 (highest).