Motorola Solutions Inc. 99FT4100 Manual De Usuario

Model L3276 Tone Remote Adapter is compatible for all versions of SLR 1000 Repeater software and
hardware.

The connections between the SLR 1000 Repeater and the Tone Remote Adapter are facilitated with a
multi-conductor cable connected between the J7 the repeater back panel AUX 25-Pin connector and
that of the Tone Remote Adapter. The connection provides for the following signals:

• Transmit Audio

• Receiver Audio

• PTT

• COR

• Monitor

• Channel Steering

• Wild Card (such as Repeater Knockdown)

• Ground

Signal connections are noted in 

Figure 40: Signal Connections Between SLR 1000 Repeater and 

Motorola L3276 25-Pin Connector for a 2-Channel Remote Control on page 96

. The repeater

connector and physical Pin locations are noted in the backplane interface board section of this
manual. See Motorola L3276 
25-Pin manual for its connector and physical Pin locations. The part number for a pre-fabricated
cable is noted in the repeater ordering guide.

The SLR 1000 Repeater is configured through the Radio Management (RM) application as shown in 

Figure 41: Radio Management Configuration for L3276 Tone Remote Adapter 
(For a 2-Channel Remote Control) on page 97

. More specifically, the affected parameters are as

follows:

• Audio Type

- Filtered Squelch

• Analog Accessory Emphasis

- De & Pre

• Disable Repeat Path

MN003557A01-AA
Appendix D: SLR 1000 Series Third Party Controllers

96  

Send Feedback