ERON ELEKTRONIK BILGISAYAR YAZILIM ve SAN.TIC.LTD.STI MS037 Manual De Usuario
Please check your firmware and app versions to verify the reference of this document.
between MIOPS and your smart phone.
In each mode you will have different parameters. You can set the parameters per your need. In order to
send your configuration, to MIOPS, you need to touch the start button on the bottom of the screen.
MIOPS will not start to function until you touch the “start” key.
send your configuration, to MIOPS, you need to touch the start button on the bottom of the screen.
MIOPS will not start to function until you touch the “start” key.
You can verify if the configuration has been successfully sent, by reading the notification “Data is sent
successfully!” at the bottom of the screen.
successfully!” at the bottom of the screen.
When the configuration is successfully sent, you will see that the screen of MIOPS changes to that mode
if it is another mode. If MIOPS was in the same mode, the screen will refresh with the new adjusted
parameters.
if it is another mode. If MIOPS was in the same mode, the screen will refresh with the new adjusted
parameters.
4.3.2 Lightning Mode
The lightning mode is one of the six basic modes of MIOPS. In this mode, MIOPS will trigger your camera
or flash unit, if it detects any sudden light event like lightning, fireworks, sparks, flash lights etc. Lightning
mode has a single parameter to be adjusted and it is the sensitivity. You can set the sensitivity anywhere
between 1 percent to 99 percent. If you want to capture light events which are not very powerful, you need
to set the sensitivity to a high value. This will help you to capture more events. If you want to capture the
most distinctive events only, you need to set the sensitivity to a lower value. In this case, MIOPS will not
trigger your camera for a lightning which strikes very far away with little light emission.
or flash unit, if it detects any sudden light event like lightning, fireworks, sparks, flash lights etc. Lightning
mode has a single parameter to be adjusted and it is the sensitivity. You can set the sensitivity anywhere
between 1 percent to 99 percent. If you want to capture light events which are not very powerful, you need
to set the sensitivity to a high value. This will help you to capture more events. If you want to capture the
most distinctive events only, you need to set the sensitivity to a lower value. In this case, MIOPS will not
trigger your camera for a lightning which strikes very far away with little light emission.
The optical sensor of MIOPS is also sensitive against IR (Infrared) light. As human eye cannot see IR, you
may wonder why MIOPS is triggering your camera even if there is no lightning. The reason is most
probably that there is an IR light event in the environment.
may wonder why MIOPS is triggering your camera even if there is no lightning. The reason is most
probably that there is an IR light event in the environment.
The artificial light sources may cause false triggering. So, make sure that you are away from artificial light
source. Light bulbs are the most common form of artificial light. When you are using MIOPS in lightning
mode, make sure that you are away from light bulbs.
source. Light bulbs are the most common form of artificial light. When you are using MIOPS in lightning
mode, make sure that you are away from light bulbs.