ERON ELEKTRONIK BILGISAYAR YAZILIM ve SAN.TIC.LTD.STI MS037 Manual De Usuario

Please check your firmware and app versions to verify the reference of this document. 

The sensitivity of the lightning mode can be 
adjusted, using the touch dial on the screen. 
Turning the dial clockwise will increase the 
sensitivity and vice versa. The faster you turn 
the dial, the faster will change the sensitivity. 
The current level can be read in the middle of 
the dial. If you want to fine tune the sensitivity 
level, you need to turn dial really slow. You 
can change the level by +/- 1 percent if you do 
so. 

You can change the sensitivity anytime, by 
using the buttons on MIOPS as well. But the 
settings on the smartphone app will override 
the settings on MIOPS, whenever data is sent 
from the app to MIOPS 

 

As it is the case in all modes, do not forget to touch the “start” button. Verify that data has been 
successfully sent to MIOPS to ensure a proper operation. 

The sound mode is used for high-speed photography where your regular DSLR camera is too slow to take 
pictures of popping balloons, breaking glasses, exploding items etc. The idea behind using a sound 
trigger is very simple. Instead of triggering your camera, you are going to trigger the flash unit. Your 
camera will be in bulb mode in a completely dark room. Whenever the flash is triggered, you will capture a 
single frame. Instead of taking many pictures with a high-speed camera, you will capture a single frame 
with your regular DSLR camera. In this setup, the speed of the flash unit is also very important. The faster 
the flash unit, the sharper will be the image.