ERON ELEKTRONIK BILGISAYAR YAZILIM ve SAN.TIC.LTD.STI MS037 Manual De Usuario

Descargar
Página de 20
Please check your firmware and app versions to verify the reference of this document. 
 
4.3 Using the Application 
The app has a menu style interface to switch between different modes. The initial menu will appear on the 
left hand side of the screen. Different modes will be listed from top to button. You can select the mode you 
want to use by touching the icon. The menu will scroll down to show additional modes that do not fit into 
the screen. The menu will disappear once you select any mode and the app will enter in to the 
configuration page of that particular mode. You can switch between different modes anytime. In order to 
do that, you need to touch the menu icon on the top-right hand side of the screen. When you switch back 
and forth between different modes, the settings will not change. 
 
 
The first button on the menu is Search 
Devices button. This button is used if you 
haven't connected to your MIOPS as you have 
started the app. You can use the same button 
if your MIOPS has disconnected for some 
reason. The range, in which a MIOPS unit can 
be discovered, depends on different factors. If 
your device is not discovered by the app, get 
closer to the MIOPS. If there is too much 
interference in the environment, it may take 
longer to connect. If you have multiple MIOPS 
units in the area, you will see all of them on 
the screen. You can connect to a single 
MIOPS at a time. 
The Bluetooth connection is only needed until you have configured your MIOPS. Once you have 
successfully configured your MIOPS, you don't need keep the app running. If you want to switch to 
another mode or change settings, you will need to start the application again. In that case, you can use 
the Search Devices button to discover and connect to your MIOPS again. A continuous connection is 
needed when you are going to use the four release modes: Cable Release, Press & Hold, Press & lock, 
Timed Release. These modes will only function properly if there is an active Bluetooth connection