C&E FS20 4-channel Surfa-mount Switching capacity (max.) 3680 VA 46135 Hoja De Datos

Avoid the following adverse ambient conditions at the installation location or during transport:

- Moisture or excessive air humidity

(Note: Do not overstep the bounds of protection class IP65 even when the casing cover is
properly closed at the installation location!)

- Extreme cold or heat

- Dust or flammable gases, vapours or solvents

- Strong vibrations

- Strong magnetic fields such as those found near machines or loudspeakers

This product does not require maintenance.

Before cleaning, disconnect the remote switch as well as all the consumer
loads from the supply voltage (all poles).

Then clean the remote switch using a soft, clean, dry and lint-free cloth. To remove heavier dirt,
use a cloth which is slightly moistened with lukewarm water. Do not use solvent-based
cleaning agents, as these may damage the surface of the plastic casing and its inscription.

Afterwards, allow the remote switch to dry completely before connecting it and
the consumer loads to the supply voltage.

When the product is no longer usable, dispose of it in accordance with the
applicable statutory regulations.