C&E FS20 4-channel Surfa-mount Switching capacity (max.) 3680 VA 46135 Hoja De Datos
Los códigos de productos
46135
16
10. Resetting to the delivery state
If necessary, you can delete the programs and settings that were previously saved in the
remote switch, thus setting the remote switch back to its delivery state with all default settings.
remote switch, thus setting the remote switch back to its delivery state with all default settings.
Each channel must be deleted separately. Advantage: You can, for example,
only delete the settings for channel 1 whilst all the other channels’ stored
values remain saved.
only delete the settings for channel 1 whilst all the other channels’ stored
values remain saved.
To do so, proceed as follows:
• Press the control button of the relevant channel on the remote switch for at least 5 seconds.
• The channel’s control indicator/LED starts to blink and the device is now in programming
mode.
• Briefly press the control button of the relevant channel on the device again.
All assigned addresses and the timer mode with its programmed timer setting are deleted
or deactivated.
or deactivated.
• The control indicator/LED goes out and the programming mode is ended.
The remote switch no longer responds to any remote control command and
must be re-programmed for new operations.
must be re-programmed for new operations.