C&E FS20 4-channel Surfa-mount Switching capacity (max.) 3680 VA 46135 Hoja De Datos
Los códigos de productos
46135
12
c) Operation
• Remote control operation:
Switching on:
Briefly press the right button of the programmed button combination
Switching off:
Briefly press the left button of the programmed button combination
• Direct operation:
Briefly press the channel button (‘channel 1’ to ‘channel 4’) on the remote switch.
When consumers are switched on, the control indicator/LED for this channel
lights up on the remote switch.
lights up on the remote switch.
You are now able to use the basic functions of the remote switch.
If you would like to expand your wireless control system or to apply further special functions
of the remote switch, please read the following section.
of the remote switch, please read the following section.
8. Timer function
The remote switch can also be used as a timer.
Each channel has a separate timer.
That means that, (when a switch time has been programmed), after every power-on command
the respective channel stays on for the programmed time and then turns off when this time has
elapsed.
the respective channel stays on for the programmed time and then turns off when this time has
elapsed.
Each channel can be programmed with a switch-on time of between 1 second and 255 minutes
(4h 15min).
(4h 15min).
A remote control for the FS20 wireless control system is needed to program the timers.
No operation on the remote switch itself is necessary for remote programming of the timer. In
this way, you can re-program the timer using the remote control at any time.
this way, you can re-program the timer using the remote control at any time.