C&E FS20 4-channel Surfa-mount Switching capacity (max.) 3680 VA 46135 Hoja De Datos

• Simultaneously press the two buttons of the button combination assigned to the desired

switching channel on the remote control for one to five seconds (1s to 5s).

• The channel’s control indicator/LED on the remote switch blinks. The time measurement

for the desired on-time begins.

• After the desired amount of time has expired press both buttons on the remote control again

simultaneously for one to five seconds (1s to 5s).

The timer duration for the selected switching channel is now programmed.



If the time measurement is not ended manually, the timer programming mode
will automatically be ended after 255 minutes (4 hours 15 min).

The timer is then programmed for an on-time of 255 hours (4 hours 15 min).

There are two different ways of doing this:

• Briefly press (less than 0.4 seconds) the control button of the programmed channel on the

remote switch.

or:

• Briefly press (no more than 0.4 seconds) the right button of the assigned button combina-

tion on the remote control .

The channel of the remote switch socket and connected consumer loads can, of course, be
switched-off manually at any time. There are two different ways of doing this:

• Briefly press the control button of the programmed channel on the remote switch.

or:

• Briefly press the left button of the assigned button combination on the remote control.