C&E FS20 4-channel Surfa-mount Switching capacity (max.) 3680 VA 46135 Hoja De Datos

• Simultaneously press the button combination assigned to the desired switching channel

on your remote control for one to five seconds (1s to 5s).

• The channel’s control indicator/LED on the remote switch blinks.

• Now briefly press the control button assigned to this channel on the remote switch. The

timer programming mode is ended and the timer function is removed. The channel of the
remote switch can now again be used in its normal manual switching operation.

To override an automatic switch-off by the timer function for the current timer setting (for
example a lamp should not be switched off after the timer setting expires), proceed as follows:

• Press the right button of the assigned button combination on your remote control for longer

than 0.4 seconds.

or:

• Alternatively, press the channel’s control button on the remote switch for longer than 0.4

seconds, provided that the channel is switched off. After this, the remote switch remains
permanently switched on.

The timer function is available again after the next manual switch-off; the remote switch
automatically switches off after the timer duration has elapsed.