Cypress Semiconductor CapSense® Controller kit CY3280-BK1 CY3280-BK1 CY3280-BK1 Manual De Usuario

8

CY3280-BK1 Universal CapSense Controller Quick Start, Doc. # 001-37959 Rev. **

Use the Board as Factory Programmed

2.3  From the Port menu, select MiniProg1/<Identification Code>.

2.4 Click 

. The D1 LED on the CY3280-20x34 board lights 

green.

2.5  Touch the slider on the board with your finger. An LED will light up representing where your fin-

ger is on the slider. The LED state changes as you move your finger across the slider

2.6  Touch one or more buttons with your finger. The LEDs light up corresponding to the buttons 

being pressed.

Follow these steps if you wish to reset the board to the original factory installed programming:

2.7  Place shunts on pins 2 and 3 of J1 and pins 1 and 2 of J4.

2.8  The example projects are available on the CD and from the Cypress web site. On 

www.cypress.com

, search for CY3280-BK1.

2.9  To reset the board to the factory conditions, connect your computer to the CY3280-

20x34 board ISSP Connector (J3) using the PSoC MiniProg and a USB cable.

2.10 Open PSoC Programmer by going to the Windows Start menu 

 All Programs  

Cypress MicroSystems 

 PSoC Programming  PSoC Programmer

2.11 Click File Load, navigate to, and open the CY3280_20x34_slm.hex file on the CD at:

2.12 From the Device Family menu, select 20x34.

2.13 From the Device menu, select CY8C20434-12LFXC.

2.14 Click Program. “Programming Succeeded...” appears in the Actions pane when programming 

is complete.

Note: The CY3280_20x34_slm example project is a PSoC Designer project, and will not open with 
PSoC Express. PSoC Programmer uses .hex files generated by both applications.