Atmel SAM4S-XPLD Atmel ATSAM4S-XPLD ATSAM4S-XPLD Hoja De Datos

 417

SAM4S [DATASHEET]

11100E–ATARM–24-Jul-13

There may be a latency between the assertion of the read/write controlling signal and the assertion of the NWAIT signal
by the device. The programmed pulse length of the read/write controlling signal must be at least equal to this latency plus
the 2 cycles of resynchronization + 1 cycle. Otherwise, the SMC may enter the hold state of the access without detecting
the NWAIT signal assertion. This is true in frozen mode as well as in ready mode. This is illustrated on 

. 

When EXNW_MODE is enabled (ready or frozen), the user must program a pulse length of the read and write controlling
signal of at least:

minimal pulse length = NWAIT latency + 2 resynchronization cycles + 1 cycle

EXNW_MODE = 10 or 11
READ_MODE = 1 (NRD_controlled)

NRD_PULSE = 5 

A[23:0]

MCK

NRD

4

3

2

1

0

0

0

Read cycle

minimal pulse length

NWAIT latency

NWAIT

intenally synchronized

NWAIT signal

WAIT STATE

2 cycle resynchronization