Geo PCK-EN-005 Hoja De Datos
12
You should have availble now:
1. Budget per day:
TARG:
________________ Eur/day
e.g. 3,12 Euro/day
2. kilowatt-hour rate (HT):
TARIFF1: ________________ Eurocent/kWh
e.g. 21,4 Eurocent/day
3. Night tariff:
TARIFF2: ________________ Eurocent/kWh
e.g. 18,4 Eurocent/day
4. LT start time:
T2_ON:
________________ h
e.g. 22:00 h
5. LT end time:
T2_OFF:
________________ h
e.g. 06:00 h
The capitalized words are variable names you will find on the display.
This operation must be carried out at any price change. The change in the display must be performed
nearest to the effective day (e.g, year’s end) to avoid improper alarms. .
nearest to the effective day (e.g, year’s end) to avoid improper alarms. .
11. Advanced display configuration
To start the advanced configuration mode, press and hold the middle button for some seconds.
First 3 steps are equal to step 2 of the display setup. The following settings apply to the budget display, indicating
whether today was more power consumed as intended by the advance payment.
whether today was more power consumed as intended by the advance payment.
„CURRENCY“ (local currency)
Please select your local currency.
„SET UNIT“ (Budget unit)
The calculation of this manual is based on the cost per day. Alternatively, your budget can refer to a consumption
value in kWh per day.
value in kWh per day.
„SET TARG“ (Set the amount of your budget)
Please enter here the result of your calculation of the previous chapter.
This ist he „starting value“ at 0:00 h to becounted down over the day.
„TARIFF 1“ (or HT)
Please enter here the rate per kWh.
Example:
26,9 Eurocent/kWh -> set 0,269
27,51 Eurocent/kWh -> round up -> set 0,276
Costs calculations should always be rounded up to conduct it advantageously for the customer. The
customer will be asked to respond earlier (forecast) as costs appear to the consumer somewhat higher
than in reality.
customer will be asked to respond earlier (forecast) as costs appear to the consumer somewhat higher
than in reality.