Intel S5500WBR Manual De Usuario
Functional Architecture
Intel® Server Board S5500WB TPS
34
Revision 1.9
Intel order number E53971-008
3.9.2
RMM3 Advanced Management Board:
The RMM3 advanced management board serves two purposes. The first is to give the
customer the option to add a dedicated management 100-Mbit LAN interface to the product.
The second is to give additional flash space, enabling the Advanced Management functions to
support WS-MAN and CIMOM. The RMM3 comes with a third 10/100GbE NIC that connects to
the board. RMM3 management traffic can use the third NIC or NIC 1.
customer the option to add a dedicated management 100-Mbit LAN interface to the product.
The second is to give additional flash space, enabling the Advanced Management functions to
support WS-MAN and CIMOM. The RMM3 comes with a third 10/100GbE NIC that connects to
the board. RMM3 management traffic can use the third NIC or NIC 1.
Table 8. RMM3 Features
Manageability features
Description
Embedded Web U
Remote Power on\off, sensor status, system info,
System Event log, and OEM customization
System Event log, and OEM customization
KVM Redirection
High performance and multiple concurrent sessions
USB 2.0 Media Redirection
Boot over remote media
Security
SSL, SSH support
WS- MAN
Dedicated NIC
Shared NIC (Onboard NICs)
LDAP Support
3.10 Serial Ports
The server board provides two serial ports: an external RJ-45 serial port and an internal serial
header.
header.
The rear RJ-45 serial A port is a fully-functional serial port that can support any standard
serial device.
serial device.
The serial B port is an optional port that is accessed through a 9-pin internal DH-10 header.
You can use a standard DH-10 to DB9 cable to direct serial A port to the rear of a chassis.
Appendix A defines the serial B interface.
You can use a standard DH-10 to DB9 cable to direct serial A port to the rear of a chassis.
Appendix A defines the serial B interface.
3.11 Wake-up Control
Wake from S1 is supported on LAN, USB, Serial port, and PCI Express* slots.
3.12 Integrated Video Support
The SVGA subsystem supports a variety of modes, up to 1280x1024@24bpp modes under 2D.
It also supports both CRT and LCD monitors up to a 200 Hz vertical refresh rate.
It also supports both CRT and LCD monitors up to a 200 Hz vertical refresh rate.
The video is accessed using a standard 15-pin VGA connector found in the I/O panel area of
the server board. You can disable the onboard video controller using the BIOS Setup utility or
when an add-in video card is detected. The system BIOS provides the option for dual-video
operation when an add-in video card is configured in the system.
the server board. You can disable the onboard video controller using the BIOS Setup utility or
when an add-in video card is detected. The system BIOS provides the option for dual-video
operation when an add-in video card is configured in the system.