Bunn SILVER SERIES JDF-2S Manual De Usuario

8

FIG  4  Refrigeration Switch

FIG  5

Press and Hold Dispensing:

1.  Place a cup on the drip tray beneath the desired dispensing nozzle.

2.  Press and hold the “Product Dispense” switch until the beverage reaches the desired level, then release.

The refrigeration switch is located on the rear of the dispenser 

near the center. This switch controls power to the water bath 

pump  and  relay  contacts  for  the  compressor  and  condenser 

fan motor.

P3580-1

A.  Product Dispense Switch

 

Pressing and holding switch will initiate product flow from the respective nozzle; releasing the switch will 

stop the flow.

B.  Dispense Lockout Switch

 

This switch is located at the bottom front of the dispenser just behind the drip tray. It is used to turn ON and 

OFF the Dispensing function. It is also used for some programming and fill procedures.

FIG  6

P3583

P3612

38945 050106