Emerson Liebert iCOM Manual De Usuario
Service Menu Parameters
155
Liebert
®
iCOM
®
8.6
Service-iCOM-DO Setup Menu Screens
The iCOM-DO Setup menu is used to configure the Liebert iCOM-DO.
Figure 146
iCOM-DO overview and override screen, page 1 of 3
S721 Liebert iCOM-DO
™
—Shows the connection status of a Liebert iCOM-DO card. It displays
“connected” when a Liebert iCOM-DO card has been set up and connected to the Liebert iCOM via the
controller area network (CAN) bus.
S725 Override—Permits manual testing the Liebert iCOM-DO by activating each output on the
S725 Override—Permits manual testing the Liebert iCOM-DO by activating each output on the
following screen.